NOP 534 - Senior Engineer II
Systems and Software Test
Location
Employment type
Permanent
Posted on
October 19, 2026
About the role
ClearMotion is looking for a Senior System & Software Test Engineer to join our FAS System & SW Test team. You will plan, set up, run and debug system and software tests for ClearMotion’s proactive suspension and seating systems, with a particular focus on UDS diagnostics, DTC behaviour and CAN communication, using HIL and bench environments built on dSpace, Vector and NI tools. You will turn test results into clear evidence that drives development and release decisions.
We are hiring at Senior Engineer I or Senior Engineer II level, depending on experience. The responsibilities below apply to both levels.
Responsibilities
Test Planning & Strategy
- Define, challenge and improve verification plans, test plans, test specifications and diagnostic specifications, with full traceability from requirements to test cases, results, defects and acceptance criteria.
- Define production, characterization, regression, validation, diagnostic and fault-injection test strategies for assigned products or programs.
- Develop test coverage for UDS services and diagnostic sessions, DTC behavior (setting, confirmation, debouncing, aging, healing and clearing) and CAN communication and physical-layer performance.
- Lead medium-sized test activities or critical workstreams, from scope and resource planning through to risk control and final reporting.
- Agree test scope, expected behaviour, technical risks, results and corrective actions with customers, suppliers, and cross-functional teams.
Test Environment Setup
- Independently design, configure, validate and document complex test environments, including test benches, HIL systems, ECUs, network interfaces, automation frameworks and data acquisition systems.
- Configure Vector CANalyzer and CANape for measurement, logging, calibration and diagnostics, and NI VeriStand and TestStand for real-time stimuli, fault insertion, sequencing and reporting.
- Apply working knowledge of NI hardware (PXI/PXIe, real-time controllers, DAQ, CAN/LIN interfaces, signal conditioning and switching) and check CAN physical-layer set-up before formal testing.
- Identify gaps and inefficiencies in test environments and make them more robust, repeatable, and maintainable.
Test Execution
- Execute complete test suites independently, including functional, regression, characterisation, diagnostic, communication, robustness and fault-injection testing, and adapt quickly to other products and programs.
- Perform UDS, DTC and CAN communication and physical-layer validation using CANalyzer, CANape, VeriStand, TestStand and suitable measurement equipment.
- Review operating instructions critically and create and maintain them for new tests.
- Improve test efficiency and automation using Python, CAPL, TestStand sequences, VeriStand procedures or other approved tools.
Results & Reporting
- Retrieve, correlate and analyse data from CAN traces, diagnostic logs, DTC reports, ECU measurements, oscilloscopes and DAQ systems.
- Identify trends, intermittent behaviour and recurring failures across test runs, not just pass/fail outcomes.
- Produce high-quality test reports with full conditions, versions, configuration, evidence, anomalies, conclusions and recommendations.
- Give test designers and development teams actionable feedback on logging gaps, diagnostic evidence and coverage.
Debugging & Root Cause Analysis
- Isolate and resolve complex, rare, intermittent or multi-layer faults across the product, test environment, automation framework, network, diagnostic system or measurement equipment.
- Determine whether a failure comes from the device under test, test set-up, software, sequence, network, physical interface or measurement system, and back the conclusion with evidence.
- Act as a technical reference for debugging in a defined area (for example UDS diagnostics, CAN communication, NI systems or Vector tools) and write and improve debugging guides and fault-isolation procedures.
- Lead or support root cause analysis and confirm corrective actions through controlled retesting and regression testing.
Test Design
- Review requirements in the requirements management tool for verifiability and give the requirements engineering team feedback on inaccurate or incomplete requirements.
- Help write and review test specifications, test plans and test environment specifications using the company’s formats and standards.
Measurement & Analysis
- Identify the key data to measure during testing, record it with the right tools, and manage it so it can be found and analysed efficiently.
- Analyse recorded data to identify failures and extract critical information and present results clearly.
Domain Knowledge
- Understand the software feature and system-level function under test.
Team Contribution
- Coach junior engineers and technicians on test execution, UDS and DTC validation, CAN analysis, tools and safe working practices.
- Manage multiple priorities with minimal supervision and maintain quality when requirements change.
- Live ClearMotion’s values: earn and keep the trust of others, make big ideas happen, seek out the unknown, think independently and deliver impeccable design.
Additional Expectations
- Lead requirements reviews: assess clarity, completeness, consistency, feasibility and testability, recommend improvements and new requirements, and assess the test impact of requirement changes.
- Lead the writing and review of test specifications for multiple system and software functions in each development cycle, with complete traceability and suitability for manual and automated execution.
- Create risk-based test plans and strategies with clear scope, resources, schedules, and entry and exit criteria, and guide other engineers in test planning.
- Lead the development, qualification and improvement of test frameworks and test rigs, and review and approve test environment specifications from other engineers.
- Build excellent functional understanding of the feature under test, the complete software, the whole system, and the test framework and tools for your assigned project.
- Take part in interviews to help recruit new team members.
Requirements
- Degree in electrical, electronic, software, mechatronic or systems engineering, or a related discipline.
- Proven experience in automotive system and/or software testing, including planning, executing and reporting on verification and validation activities.
- Strong knowledge of UDS diagnostics (ISO 14229), DTC handling and CAN communication, including physical-layer behaviour.
- Hands-on experience with Vector tools (CANalyzer and/or CANape) and with HIL or bench test environments.
- Experience with NI VeriStand, NI TestStand and NI hardware, or equivalent HIL and test automation platforms.
- Scripting or programming skills for test automation and data analysis (for example Python or CAPL).
- Structured approach to debugging and root cause analysis across hardware, software and network issues.
- Experience writing test specifications and test reports with traceability to requirements.
- Experience with CAN, CAN FD, LIN, XCP or Automotive Ethernet.
- Experience designing or building HIL rigs and test frameworks.
Preferable Qualifications & Experience
- Experience with active suspension, chassis or other safety-relevant vehicle systems.
- Experience with requirements management tools (for example Jama, Polarion or IBM DOORS).
- Familiarity with ISO 26262, ASPICE or other automotive development processes.
- Experience working directly with OEM customers or Tier 1 suppliers.
Benefits
In addition to a competitive Salary, we have a health plan, alongside an unlimited paid holiday plan so that you can make the most of your time away from work.
We promise to do our best to make being part of the team the ultimate benefit with cutting edge technologies to work on and an environment centered on transparency, trust, action, curiosity, independence and design.
This environment is fostered with various ancillary benefits such as snacks & drinks and other events.

